Installing amagnetic door stop is a simple but invaluable upgrade for your home. It keeps doors from slamming into walls and holds them open when needed. Everyday tasks—like carrying in groceries—will be easier, and bigger projects—like carrying in new furniture—will be more efficient.
Unlike traditional rubber stoppers, a magnet door stop blends functionality with a design that is perfect for modern interiors. If you’re ready to install one, this guide will walk you through everything you need to know.
Tools and Materials
Before starting, gather the essentials you need:
-
Magnetic door stop (with included screws and anchors)
-
Drill and drill bits
-
Screwdriver
-
Pencil or marker
-
Level
Step 1: Choose the Attachment Spot
Decide where you want the magnetic door stop to sit.There are two standard options:
-
Floor-mounted: Installed on the floor behind the door. Great for heavy doors or rooms with frequent use.
-
Wall-mounted: Attached to the baseboard or wall. Ideal for lighter doors and a cleaner look.
Pro tip: Open the door to its widest swing and mark where it naturally stops—that’s usually the best spot for the magnet.
Step 2: Mark the Position
Hold the magnet door stopbase against the floor or wall. Use your pencilto mark where the screws will go.
Pro tip: Double-check with a level to ensure everything lines up properly. A crooked stopper can affect how well the magnet connects.
Step 3: Drill Pilot Holes
Drill small pilot holes where you made your marks.
-
If you’re working with drywall, insert the wall anchors before attaching the stopper.
-
For concrete or tile floors, you may need a masonry drill bit and anchors.
Step 4: Attach the Magnetic Base
Secure the base of the magnetic door stopusing the provided screws. Make sure it’s tightly fastened so the magnet doesn’t shift under pressure.
Step 5: Install the Door Plate
Now, attach the magnetic plate to the bottom of your door.
Position it so that it lines up perfectly with the stopper base when the door is open. Use the screws provided to secure it in place.
Step 6: Test the Connection
Slowly swing the door open until the magnetic plate meets the stopper. The two should click together firmly.
If the alignment is off, loosen the screws and adjust until the magnet catches smoothly.
Tips for Best Results
-
For heavy doors, choose a sturdier magnetic door stop designed to hold more weight.
-
If you want a nearly invisible look, opt for a recessed floor-mounted style.
-
Always measure twice before drilling—repositioning holes in tile, wood, or drywall can be tricky.
Final Thoughts
Installing a magnetic door stop is an easy DIY project that takes less than 20 minutes, but provides years of convenience: no more slamming doors, chipped walls, or fumbling to keep doors propped open.
With just a few tools, a little patience, and this installation guide, you can add both function and style to your home.